As alluded to above, growers can take advantage of the way plants develop in nature, essentially hacking the plants to perform in certain ways. One of these techniques is sometimes called ‘forcing.’ Forcing is the process of taking a plant that has been experiencing very long days (long exposure to light, between 18-24 hours) and suddenly switching the light exposure to only about 12 hours. By imitating the change from spring to summer, this technique has the effect of causing the cannabis plant to rapidly begin the flowering cycle. It’s this sort of high sensitivity to changes in light cycles and exposure that make it possible for growers to effectively grow cannabis.

18 hours of light + 6 hours of darkness = vegetation phase

12 hours of light + 12 hours of darkness = flowering phase

A pure Cannabis Sativa strain is not as sensitive to the light changes as some other varieties because it is originally from tropical regions of the globe. Generally speaking, the relationship between night and day is more stable in these tropical regions and changes relatively little between seasons. This is one of the reasons that Cannabis Sativa is larger than other varieties, taking up to 5 full months to reach maturity. Because it becomes so large before flowering, it is not as common for indoor gardeners to use a Pure Sativa strain. Hybrids can be grown without any problems.

If you are growing outdoors, be aware of the zone you are growing in and make sure that the climate is right. It’s very easy for a Sativa to die or be hurt in cold weather before it gets a chance to mature or flower if it’s being grown outside of its native tropical zone. This can be ameliorated somewhat by the use of a greenhouse.

Feel free to experiment and do your own research into light cycles. Every cannabis strain will react slightly differently to different stimuli. The bottom line is that the light cycle is very important to the end product harvested. When cannabis plants receive the right amounts of light in the right cycles, the plant will thrive. A plant flowers when the ratio of light/dark is equal while they will stop flowering when the periods of darkness are interrupted by light.

Regardless of whether you choose to grow your cannabis indoors or out, you are going to need a good source of light. More light means more weed. In nature, plants use the sun. Light is the force which makes photosynthesis possible, converting that energy into usable glucose and oxygen. Photosynthesis splits hydrogen from oxygen and then combines with oxygen and glucose.

Glucose is the fuel of the plant, the chemical that powers the basic building and growing functions that carry Cannabis from seed to smoke. Your plants use a lot of light to produce it, and, in general, the more, the better. The important thing to remember is to keep the rest of the environment balanced with whatever amount of light you’re applying. You need to monitor the temperature, humidity, and levels of carbon dioxide in the air. Beyond that, your plant requires adequate nutrients and plenty of water.

Your eventual goal as a grower is a high-quality yield of buds, and this will be determined in great part by the amount of light your plants receive. Cannabis is especially receptive to heavy lighting, and the quality and size of your flowers will be determined in part by all those lumens!

In general, you want a minimum of 30,000 lm per 10 square feet in your grow room. With the proper balancing of the environment, you can go all the way up to 80,000 lm per 10 square feet. Don’t do this unless you are planning on devoting a lot of time, energy, and money into making sure that the environment is constantly getting the necessary tweaks.

The flowers or buds of the Cannabis plant are comprised of the stalk, the leaf, and the calyx. If a plant receives light in abundance, then the plant will focus more on producing calyces than making flowers. The reverse holds true. If a plant isn’t getting enough light, then more energy will be devoted to the production of leaves, and you will end up with a worse harvest. This is because the plant is trying to compensate for the low amount of light by making extra leaves to pull in sunlight.

The spectrum of light your plants are receiving affect growth a great deal. The sun has a very full spectrum, but you can control the types of light you are using in your grow room to achieve some excellent effects. Photosynthesis and a number of chlorophyll related reactions are stimulated by the orange, red and blue sections of the spectrum. Phototropism is controlled by colors ranging from blue to ultraviolet. This is the phenomenon by which a plant grows itself into the best possible position for capturing light.

The most important general rule to remember about light and Cannabis cultivation is that red spectrum colors induce flowering, while blue spectrum colors promote growth.

The cycles or periods of time during which your plant receives light is also important. While your plant is growing, it should be receiving about 18 hours of light for every 6 hours of darkness. When it’s time to flower, you’ll want to switch to 12 hours of light and 12 hours of darkness (hint: there are only 24 hours in a day). One of the really nice things about indoor growing is that you have full control over the light. You choose how the passage of night and day will occur, and so you should be mindful of providing it in ideal proportions so that your plant thrives.

Different grow lights marijuana

If you’re growing indoors, you’ll have to decide how best to set up your own lights. There are a lot of different options when it comes to the lighting system, and there are a lot of opinions, too. Lighting systems will vary in intensity, spectrum color, and the underlying technology. It will come down to the size of your grow room, your electrical needs, and how much time and money you’re willing to invest into lighting up your grow room.

When you choose a light system, first plan on how much light you need to use, then compare that to how much light you can realistically provide for the plants. If you live in an old house with direct current, it probably won’t be much! Be realistic, and remember that lights use up a lot of power.

When it comes to lighting, you have a lot of different choices. We covered some of the basics in types of lighting in the last section. In this section, we’ll cover more about the different choices you’ve been presented with, and discuss some of the pros and cons of the different lighting setups. Below we’ll offer a general look at some of the other lighting options you’re faced with as a Cannabis cultivator. Many growers argue about which lights are the best, but, in general, every type of light specializes in a certain phase of growth or a certain type of job. It’s up to the grower to decide how much time and money they want to invest into their lighting systems.

CFL – Fluorescent lights
In the early days of Cannabis cultivation, fluorescent grow lights were used by growers to simulate the sun, just as they had been used for many years by farmers and botanists for indoor growing and early germination in cold climates. Unfortunately fluorescent lights are expensive and you require a lot of fluorescents to simulate natural sunlight. Not only that, but it requires a lot of different types of fluorescent lights to mimic the full spectrum of natural light.

Nowadays, growers still use fluorescent lights when plants are extremely sensitive to heat. This applies to cuttings and seedlings in early stages of growth. Keep in mind, however, that the fluorescent lights still need to be close to the plants themselves, usually about 5 cm away. Fluorescent technology has changed somewhat, too, and now fluorescent lights offer slightly higher quality growing for Cannabis than they used to. If you’re using fluorescents, you’ll also want reflectors to go with them, to maximize their efficiency and save yourself some energy.

HID – High intensity discharge lights
High-intensity discharge grow light were first invented for a huge scale, for use in public arenas and stadiums. These sorts of light are very powerful, and they’re used by a lot of botanists and horticulturists to grow lots of things besides Cannabis. But they do work quite well for Cannabis, so let’s talk about them. Within the various types of HID light, we have mercury, metal halide, and sodium vapor light. We’ll cross mercury lights off the list right away because their lumen to watt capacity is too low for them to compete with the others.

MH – Metal halide lights
Metal halide grow lights produce light by arcing an electric current through mercury gas mixed with some sort of metal iodide such as thallium, thorium, or sodium. The light that it produces falls into a perfect range of the color spectrum for the growing phase of Cannabis. In particular, it’s good for producing foliage. Plus, it’s flexible: 1000 watt metal halide lights can be used to induce the flowering period in plants. Growers in the United States used metal halide lights for a long time after the introduction of HID lighting, and they performed well for all phases of plant growth.

HPS – High pressure sodium vapor lights
In the mid-80’s, when communication began in earnest about growing practices and how they differed in the US and Europe, growers and cultivators discovered a couple unusual differences. First of all, Americans were using a lot more power than their European counterparts. One of the reasons for this is because most Europeans were using horizontal reflectors and HPS grow lights, whereas Americans were using vertical reflectors and metal halide light.

HPS lights have the ideal color range for Cannabis plants during their flowering phase while metal halide are superior for the growth phase. They function similarly to other HID lights and create light by arcing electric current through a bulb containing xenon and sodium gas. They emit a dull pink glow that quickly turns into an orange-pink light once it warms up. Again, these lights work spectacularly for indoor cultivation, especially for a plant going through the flowering phase of growth.

You can purchase HPS lights in a number of different strengths: 250w, 400w, 600w, and 1000w. Don’t even think about using the 1000w light unless you’re growing a whole field in an underground bunker. In order to take advantage of the strength, you have to cool your grow room with an air conditioner.

Your best bet is to purchase two 400w or 600w HPS lights: these will evenly diffuse light for your plants, and they aren’t overly lot so you have a low risk of heat damage.  Keep in mind that you might want to use a fluorescent light in conjunction with your sodium vapor light.

LED – Light emitting diodes
Led grow lights weed

LEDs (light emitting diodes) have become ubiquitous in the lighting world over the last decade. While not necessarily the ideal light for growing cannabis, LED lights offer several advantages.

First of all, they are low voltage, which means less money spent on upkeep and electricity to keep them running. Coupled with this, they produce very little heat, which means you don’t need to worry about overheating your grow room if you use LED lights. It also further reduces your reliance on ventilation and fans, adding even deeper energy savings. In fact, depending on your operation, you may very well need to heat the room if you are using LED lighting.

For growers prioritizing privacy, LED lights offer an additional bonus— the low heat makes LED lighting virtually impossible to detect with thermal imaging techniques commonly used to spot the infrared heat of more conventional HPS lights. LED lighting is also quieter than the other lighting options, without the background hum emitted by HPS lights.

Remember that not all LED lights are created equal! Be sure to check your bulbs and make sure that they are high-wattage and have a high lumen value. The higher these are, the brighter your light will be. You also want to make sure that LED lights you choose have been specifically manufactured to emit light at the full spectrum of color your plants need for proper photosynthesis.

LED lights do have a higher initial investment than some of the cheaper options, which can cause some growers to be skeptical about using them. Then again, they are very efficient. LED lights waste far less energy as heat, assuming the room doesn’t need to be heated, and those savings on electricity will pay for themselves in just a couple years. You also don’t need to worry about setting your grow room on fire, and LED lights last for a long time. Some manufacturers advertise more than 100,000 hours of life in their LED bulbs, which gives you enough time for almost ten years of harvesting. Click here for the best led lights for marijuana plants.

Above all, be smart about using what you’ve got. It’s important to have lighting, but you need to plan it out, too. You can’t just fill a room with ultra-high wattage lights and expect your plants to thrive. Don’t waste valuable power, and learn how to make use of your resources.

Positioning lights and plants
In this section, we’ll run through some basics on positioning your marijuana plants and lights, as well as covering some tips and techniques for avoiding stretching in your plants. This section will help you maximize the growth and bud efficiency of your plants, so pay attention.

The leaves of the Cannabis plant uses light for photosynthesis, and the plant will orient itself towards the light it needs. Outdoor, it’s easy to see this phenomenon in other plants, and you’ll see it yourself in indoor growing operations. If you put the Cannabis plants too close together, they will prevent each other from getting light and less photosynthesis will take place. Obviously this will cause major issues for your plants. Make sure that every plant gets plenty of light.

You also want a fairly uniform amount of light cast onto the plants themselves.

It’s important that the buds on your plants all get the exact same amount of light, even if they are of different sizes. To do that, you need to make sure that each plant gets plenty of space. You don’t want any plants to hog all of the light and prevent its smaller relatives from growing.

Giving your plants plenty of space from one another will also help air circulate, which is extremely important for maintaining stable levels of humidity. Let the plants touch each other only a little, or you risk buds malforming. This could encourage bacterial or fungal growth.

If you aren’t growing a lot of huge plants, you can keep them together with small gaps. Trimming isn’t the best solution, but sometimes growers need to make do with limited space. Above all, your plant needs reliable and uninhibited access to light in order to thrive. Don’t let the plants crowd each other out!

An easy mistake for many growers is placing their Cannabis plant too far or close to their lighting fixtures. Obviously if a plant is too far from a light, it won’t be getting the energy it needs to produce a healthy crop. These sorts of plants will grow up to be too thin and spindly, lacking the structural integrity to bear heavy yields. The opposite is true for lighting that is too close. It will be too hot, and plants can dry out and even die if they are badly burned by a powerful light source.

One thing to remember in regards to light and positioning is that you want each plant to receive the maximum benefit possible from the lights. That means smaller or shorter plants should be put closer to a light source than big ones so that they receive equal amounts of light. Although this seems simple, it’s a common oversight for new growers (and sometimes old ones.)

Utilizing this technique also offers a grower the advantage of keeping smaller plants out of the shadows of the larger ones, an issue which would compound the lack of light. If your plants are of similar sizes, it’s not a bad idea to move them or the lights around periodically to help ensure that they are all getting equal shares of the bright stuff.

Use reflective materials
You want every little bit of light to get to your Cannabis plants. The old saying “Waste not, want not” applies quite well to the cultivation of Cannabis. One of the first steps in preventing light loss for your growing operation is to reflectors in addition to your lights. This means you’ll want your lights positioned horizontally so that the reflection process is maximized. Vertically aligned reflectors inevitably lose more light than the horizontal ones.

Also, try not to use any reflectors with single parabolas. Double parabola reflectors are far better at reflecting light. This goes for closed reflectors too. Closed reflectors function better because they direct light more efficiently into a tighter focus. That means you want horizontally installed double parabola closed reflectors in addition to the lights you choose.

The two most common materials for reflectors are aluminum, both beaten and smooth. Each type of aluminum does a good job of reflecting light, but beaten aluminum will help diffuse the light. Some growers suggest that just painting the walls of a grow room white or using linoleum paneling is good enough reflectivity for your interiors. This is, of course, after the actual reflectors themselves, but your best bet is always going to be Mylar grow tent.

Mylar is extremely reflective and does a great job of helping you maintain a stable environment for your plants.  There’s a reason it’s used by growers all over the world. Just make sure you draw it tightly over the walls so there aren’t a lot of nooks and crannies in the surface to cause the light to dissipate.

Safe installing
When you’re setting up a lot of different lights and reflectors, you should take extra care, especially if you are a new or amateur grower. After you’ve set up all the necessary lights and electrical equipment, you’ll be dealing with massively strong currents. If things aren’t set up properly and carefully monitored, you could experience power surges, outages, shocks, and fires. At high voltages, these can all be extremely serious issues, and very dangerous.

Not only that, but if you’re using a hydroponics system like many indoor growers, you’re going to have a lot of water flowing around in that grow room. Water and electricity don’t mix well. Make sure everything is well grounded and safe in case of any sort of surge or spill. If you’re either a new grower and lack experience with electricity and wiring, leave these things to a professional. If you hire a professional make sure to check their background and make sure they know what they’re doing.

Because of the inherent risk of spills and floods in a grow room, make sure that all of your electrical equipment is raised up off of the ground. Keeping it all above ground will help prevent any short circuiting if the room floods.

Make sure your wiring and electrical systems are capable of dealing with the intense demands of a grow room before you get started too. We strongly advise professional help when it comes to electricity and wiring. Don’t burn your house down for some plants!

You’ve got lights, plants, nutrients, and everything you need to grow. You set up your grow tent, set your plants in place, and start hanging your lights. But before you switch those lights on, are you sure you know how high you need to hang them above your plants?
Hanging your lights too low can burn them, but hanging them too high can leave them stretched and weak. Some lights need to be far away from plants so you don’t burn them, but some lights are too weak to hang more than 10 inches away- so what do you do?
The trick is to hang your lights right in that sweet spot of effectiveness and safety. The distance of your lights to your plants is all about getting your plants the power they need to turn nutrients in to food for growth. So before we start talking numbers, let’s talk about the idea behind hanging your grow lights:

Fluorescent Grow Lights
Fluorescent grow lights are a nice, easy blend of energy and spectrum output. They’re low in both, but still effective enough to grow nearly any plant. But to do so, you’ll need to hang them pretty close.

What makes hanging fluorescent lights so tricky is that not all of them are the same. For instance, 35w CFL bulbs can generate some decent heat over an extended period of time because of their compact size, whereas a longer 54w 2ft T5 grow light won’t generate lots of heat because it can dissipate it along its tube. Not only that, but the more bulbs you use the more heat you’ll generate, which is dangerous if it’s hung too close to the plants.

Fluorescents aren’t known for kicking off lots of heat, but they will generate some so you’ll need to watch your plants carefully for signs of burning or bleaching. Depending on the wattage and size of the light, as well as how many bulbs are in the light, you’ll want to start off hanging them around an inch away from your plants. If your canopy feels hot move the light up another inch, and further if the canopy is still too hot.

LED Grow Lights
So is the heat these lights give off the reason they can’t be hung so close? Yes and no. Yes, because they’ll burn your plants with intense heat. No, because even if you eliminate heat you still need to worry about light temperature.

Simply put, what makes a light a “cool” blue light, or a “warm” red light, is the temperature of the light’s spectrum(s). HID’s give off good light temps, but LED’s are much more focused on spectrum output than energy generation, so you actually need to hang them higher above your plants than HID’s to avoid light bleaching. Light bleaching can be just as bad for your plants as over heating and will result in an underwhelming crop.

LED’s don’t generate lots of heat, but you’d be surprised by how high you have to hang them above you plants. For LED lights used to grow little patches of wheat grass, herbs, and spices (15w-90w) you’ll want to go at least 15″ away from your plants. For higher wattage lights it’s even further.

(240-400w) 16-30” away from plants
(450-550w) 20-30” away from plants
(600-850w) 24-26 away from plants
(900w+) 26-42” away from plants

HID Grow Lights
If you’re using HID grow lights you know that they generate a lot of heat, so hanging them close to your plants isn’t an option. On the opposite end, your plants will be flimsy and can even start to stretch too much if they’re looking for good light. Your plants spend more time trying to grow branches and not leaves and flowering sites when lights are far away.

That’s why when it comes to HID lighting, it’s best to keep them at least 12″ (30cm) away from your plants at all times. The stronger the light, the further you’ll need to hang it, so if you have a 1000w you may want to hang it at least 15″ (38cm) away. Depending on the strength of your light, you won’t want to go higher than 30 inches (76cm) above your plants. Smaller sized lights like 400w’s can only be around 20″ (~51cm) away from the plants, and medium sized 600w’s can be around 25″ (64cm) above the plants without losing vitality.

HID’s need to be hung above your plants at a good height because of the heat they generate, so if you’re using HID’s it’s important to have a tall growing space:

(400w) 12″-19″ away from plants
(600w) 14″-25″ away from plants
(1000w) 16-31″ away from plants

LED Grow Lights was best grow light for indoor growing plants.

The second type of HID lighting, High Pressure Sodium, is excellent for supplemental lighting in a greenhouse because the red light enhances flowering. The bulbs also last substantially longer than Metal Halides. Used as supplemental lighting, the orange-red light does not create leggy growth. It is interesting to note that plants do not appear as healthy under the reddish light as the blue because our eyes do not adjust well to the color. High Pressure Sodium bulbs have a long life; however, they should be replaced according to manufacturer's instructions. Bulbs continue to light beyond their useful life, however, the energy draw increases dramatically and the output lowers significantly.

Metal Halide and High Pressure Sodium lights generally do not use the same fixtures, however, some fixtures are convertible. With convertible fixtures, bulbs swap easily. A simple flip of a switch converts the fixture after changing the bulb. This is a good option for serious growers who want the benefits of compact growth, blooms and energy efficiency. The start up cost is not insignificant. However, the combination offers a tremendous amount of control in the greenhouse.

The newest type of grow lights use LED technology. One major advantage to the LED grow lights is the small size. LED grow lights are only a few inches in diameter and are easy to mount. In some greenhouses, LED grow light may be the only practical light option. Hanging most grow lights requires a strong greenhouse structure and a place to hang the lights. LED grow light weigh a fraction of other lights and are easy to configure where needed. According to LED manufacturers, LED grow light maximize blue and red light to provide and excellent balance for plants. They do not have much green-yellow light. Since humans see green-yellow light best LED grow lights appear dim to our eyes. And the most important advantage is that LED grow light is green technology which don't contain any harmful substance like HID or other traditional grow lights, and it can save 70-80% electricity bill than using HID lamp. This is newest technology used for plant growing now and becoming more and more popular.

If you want to buy led grow lights or led aquarium lighting or grow tent, please visit: www.ledgrowlight.co.nz